AMD E1 Micro-6200T socket: Socket FT3
The AMD E1 Micro-6200T uses the Socket FT3 socket as a soldered BGA chip and cannot be replaced. It is a dual core Mullins APU from 1.0 GHz to 1.4 GHz at 3.95 W with Radeon R2 graphics for tablets.
- Socket
- Socket FT3
- Launched
- April 2014
- Cores and threads
- 2 and 2
- Default TDP
- 3.95 W
- Codename
- Mullins
- Segment
- Mobile (soldered)
- Family
- AMD E1 Micro
- Clocks
- 1.0 / 1.4 GHz
AMD E1 Micro-6200T specifications
| Cores | 2 |
|---|---|
| Threads | 2 |
| Core architecture | Puma+ cores on 28 nm |
| Clocks | 1.0 GHz base, up to 1.4 GHz boost |
| Cache | 1 MB L2 cache |
| Processor base power (TDP) | 3.95 W (2.8 W SDP) |
| Manufacturing process | 28 nm |
| Memory support | DDR3L-1066, single channel |
| PCI Express | PCIe 2.0, up to 8 lanes |
| Integrated graphics | AMD Radeon R2 (128 shaders, 300 MHz) |
| Multiplier | Locked |
| Package | Socket FT3 (BGA769, soldered) |
Motherboard compatibility
AMD E1 Micro-6200T needs a motherboard with a Socket FT3 socket. Chipset by chipset data for this codename is not recorded yet. See the Socket FT3 chipset list and the board maker's CPU support list.
Socket FT3 at a glance
| Type | BGA, 769 contacts |
|---|---|
| Package size | 24.5 × 24.5 mm |
| Introduced | May 2013 |
| Memory | DDR3-1600, one or two channels, ECC on selected designs |
| Cooler mounting holes | Not applicable (soldered) |
What the E1 Micro-6200T is
The E1 Micro-6200T is the dual core Mullins tablet APU on Socket FT3 for Windows tablets and hybrids. It runs 2 Puma+ cores and 2 threads at 1.0 GHz base with bursts to 1.4 GHz. One megabyte of L2 cache covers tablet apps. Power is 3.95 W with a 2.8 W SDP rating on 28 nm from April 2014.
The SDP rating describes expected power in normal tablet use rather than worst case stress. Two cores handle reading with background sync. Bursts to 1.4 GHz cover UI animation. The soldered BGA package means buyers choose the whole tablet.
Radeon R2 with 128 shaders at 300 MHz drives tablet panels for video. DDR3L-1066 over one channel feeds cores and graphics. The E1 Micro-6200T covers tablets where the lowest Mullins power must still run Windows.
Socket and motherboard compatibility
The E1 Micro-6200T solders to the board on Socket FT3 and cannot be replaced. Tablet storage and memory lock at purchase. Boards wire eMMC with small batteries around the SoC.
FT3 tablets use SoC I/O throughout. Socketed desktops cannot take this BGA chip. The LGA, PGA and BGA: CPU package types explained guide explains soldered tablets.
Memory, PCIe and cooling
DDR3L-1066 over a single channel suits tablets with eMMC storage. Low clocked memory saves battery. Single channel is fixed by the SoC.
PCIe 2.0 with up to 8 lanes from the SoC serves eMMC and radios. Tablets use little expansion. Most builds rely on R2 graphics.
Cooling is passive spreading for 3.95 W with no fan. Skin temperature limits decide sustained bursts. Thin bodies throttle first.
Upgrade paths
On the same socket, the AMD A4 Micro-6400T at 1.0 GHz to 1.6 GHz with four cores above doubles threads, while Beema E1 parts cover notebooks. All share FT3 boards.
Newer tablets moved to Carrizo-L and Stoney Ridge. The E1 Micro-6200T holds Mullins dual core duty at 3.95 W.
Frequently asked questions
What socket does the AMD E1 Micro-6200T use?
It uses Socket FT3 as a soldered tablet chip.
How many cores does the E1 Micro-6200T have?
Two cores and two threads at 1.0 GHz base with bursts to 1.4 GHz.
Which graphics does the E1 Micro-6200T include?
AMD Radeon R2 with 128 shaders at 300 MHz.
What is the TDP of the E1 Micro-6200T?
3.95 W with a 2.8 W SDP rating for tablets.
Sources and verification
Facts last checked against these sources on . Page last edited on .