Intel Celeron G4932E socket: BGA 1440
The Intel Celeron G4932E uses BGA 1440, a soldered embedded package. The dual core 25 W chip cannot be replaced.
- Socket
- BGA 1440
- Launched
- April 2019
- Cores and threads
- 2 and 2
- Base power
- 25 W
- Codename
- Coffee Lake
- Segment
- Embedded
- Family
- Intel Celeron
- Clocks
- 1.9 / 1.9 GHz
Intel Celeron G4932E specifications
| Cores | 2 |
|---|---|
| Threads | 2 |
| Core architecture | Skylake based cores on 14 nm |
| Clocks | 1.9 GHz base, no Turbo Boost (max 1.9 GHz) |
| Cache | 2 MB Intel Smart Cache (L3) |
| Processor base power (TDP) | 25 W |
| Manufacturing process | 14 nm |
| Memory support | DDR4-2400, two channels, up to 64 GB, ECC supported |
| PCI Express | 16 lanes from the CPU, PCIe 3.0 |
| Integrated graphics | Intel UHD Graphics 610 (350 MHz base, up to 1.05 GHz) |
| Multiplier | Locked |
| ECC memory | Supported, DDR4 ECC |
| Package | FCBGA1440 (42 by 28 mm, soldered) |
Motherboard compatibility
Intel Celeron G4932E needs a motherboard with a BGA 1440 socket. Chipset by chipset data for this codename is not recorded yet. See the BGA 1440 chipset list and the board maker's CPU support list.
Recommended GPU pairing
| Recommended tier | Entry 1080p laptop (2019 era) |
|---|---|
| Example GPUs | GeForce MX130, GeForce MX150 Laptop |
| Target resolution | 1080p high settings (internal display) |
Two cores with two threads, PCIe 3.0 with 16 lanes, DDR4-2400 memory, and second quarter 2019 launch timing suit entry 1080p laptop graphics from 2019. The GPU cannot be changed in most chassis. A faster external GPU still works through Thunderbolt, but the internal balance shifts with game, settings, and resolution.
This is a rough match for a new build at the stated resolution, not a limit. A faster card still works and helps at higher resolutions or in games that load the GPU more than the CPU. A slower card is fine for lighter games and office use. The exact balance shifts with the game, the settings and the resolution, so no percentage is given.
BGA 1440 at a glance
| Type | BGA, 1,440 contacts |
|---|---|
| Package size | 42 × 28 mm |
| Introduced | April 2018 |
| Memory | DDR4-2933 on Comet Lake-H and DDR4-2666 on Coffee Lake-H, two channels, up to 128 GB |
| Cooler mounting holes | Not applicable (soldered) |
What the Celeron G4932E is
The Celeron G4932E is a dual core, two thread Coffee Lake embedded processor in a soldered package. It launched in the second quarter of 2019 with a fixed 1.9 GHz clock and no Turbo Boost at 25 W. The E suffix marks embedded use with long supply for passively cooled boards and compact signage players.
Two megabytes of Smart Cache back control loops and single display duty at low power. There is no Hyper-Threading on this Celeron, so throughput scales with its fixed clock alone. The 25 W envelope fits fanless enclosures that cannot cool the 35 W G4930E sibling.
UHD Graphics 610 with 350 MHz base and up to 1.05 GHz burst drives operator panels without a card. ECC memory support guards uptime on validated carriers despite the value price. Compared with the G4930E, buyers trade 500 MHz of clock for 10 W lower thermals and quieter installs.
Socket and motherboard compatibility
The G4932E is soldered to BGA 1440 and cannot be replaced. The FCBGA1440 package at 42 by 28 mm reflows once to the embedded carrier with Coffee Lake era board logic. There is no socketed path despite shared silicon with LGA 1151 desktop Celerons.
Carriers for this low power SKU define DDR4 ECC slots, display outputs and storage for sealed boxes and kiosks. The LGA, PGA and BGA: CPU package types explained guide explains why embedded BGA service stocks spare carriers instead of spare chips. Thermal design assumes sustained 1.9 GHz without fan aid in closed cases. Fanless certification covers the whole carrier, so heatsink, case and board ship as one thermal unit for field installs.
Desktop LGA 1151 boards cannot host the BGA chip despite the same Coffee Lake architecture inside. Package, firmware and power delivery differ between soldered and socketed lines. Selection happens at system design with enclosure heat limits weighed beside clock speed and ECC need.
Memory, PCIe and cooling
DDR4-2400 ECC in two channels up to 64 GB is the rated embedded memory. Compact carriers use SODIMM slots for serviceability, while sealed boards solder memory down for shock resistance. ECC corrects single bit errors during continuous duty in warm enclosures and roadside cabinets. Matched pairs unlock dual channel bandwidth for panel graphics and logging throughput on busy lines.
Sixteen PCIe 3.0 lanes split for NICs, capture cards and NVMe per carrier design. Low power carriers often dedicate links to networking and storage rather than graphics. Extra board logic adds serial, USB and SATA around the CPU lane budget for legacy device support.
Cooling is a compact 25 W block or chassis spreader for fanless duty at 1.9 GHz. Vent paths and cabinet airflow decide stability because the fixed clock never rests during shifts. No retail cooler pattern exists for this soldered package, so thermal work stays with the carrier vendor.
Upgrade paths
Soldered packaging blocks processor upgrades for the life of the carrier. Memory and storage growth extend embedded service, and carrier replacement is the performance path at refresh. A second DDR4 channel also lifts graphics for panel animations and smooth signage playback.
When two cores no longer suffice, the step is a new embedded board in BGA 1440 class with a quad core such as Intel Core i3-9100HL. That move keeps the BGA service model while adding threads for heavier HMI work and vision tasks.
For fleets, spare carriers matter more than faster chips for uptime and service cost. Phase carriers while keeping enclosures, power and I/O wiring intact, then retire the old soldered board as one field replaceable unit with its memory and storage. Keep one golden image per carrier revision to cut validation work and keep technicians fast across sites.
Frequently asked questions
What socket does the Intel Celeron G4932E use?
It uses BGA 1440 soldered to the embedded carrier. The dual core 25 W chip cannot be replaced.
Does the G4932E support ECC memory?
Yes, DDR4 ECC up to 64 GB in two channels on validated carriers for industrial duty and continuous operation.
Does the G4932E have Turbo Boost?
No, it runs at a fixed 1.9 GHz with no Turbo Boost across its two cores and two threads.
When did the G4932E launch?
Second quarter of 2019 with the Coffee Lake embedded Celeron line for low power boards.
What is the difference between G4932E and G4930E?
The G4932E runs 1.9 GHz at 25 W while the G4930E runs 2.4 GHz at 35 W, with the same cache and graphics.
Sources and verification
- Intel Celeron Processor G Series (Intel, G4932E Q2'19 1.9 GHz 25 W)
- List of Intel Celeron microprocessors (HandWiki, G4932E BGA 1440 UHD 610)
Facts last checked against these sources on . Page last edited on .