Intel Core 5 221TE socket: LGA 1700

What the Core 5 221TE is

The Intel Core 5 221TE covers the 45 W point of the 14-core Bartlett Lake embedded lineup under Core Series 2. Six Performance-cores with Hyper-Threading plus 8 Efficient-cores yield 20 threads, 24 MB of Intel Smart Cache is shared, and clocks run 1.8 GHz P-core base with turbo to 5.0 GHz alongside 1.3 GHz E-core base to 3.6 GHz boost. Intel lists the part as an embedded vertical segment SKU on FCLGA1700 at a 232 USD recommended customer price, built on Intel 7.

Fourteen cores at 45 W suit compact edge servers, inspection cells and telecom shelves that consolidate control and data plane work in one small cabinet. The 1.8 GHz P-core base keeps the low envelope in reach, while bursts to 5.0 GHz clear interactive and build spikes. Eight E-cores add parallel margin for logging, containers and inference helpers.

Against the 65 W Intel Core 5 221E twin above it, the 221TE trades base clocks for a 20 W lower envelope at identical core counts. Against the 45 W 10-core Intel Core 5 211TE below it, the 221TE adds 4 E-cores for denser cells. ECC support and long-life supply suit sites that qualify once and deploy for years. See Socket vs chipset: what decides whether a CPU works for why chipset series plus BIOS revision together decide board fit.

Socket and motherboard compatibility

Packaging is FCLGA1700 for LGA 1700 in a 45.0 × 37.5 mm package, and only industrial firmware brings the chip up. Typical carriers are W680 and Q670 class boards, joined by R680E embedded designs documented for the family. Because board vendors qualify power classes individually, the 221TE must appear by name on the support list rather than being assumed from socket fit.

Consumer hardware is generally fenced off by BIOS policy for this embedded family. Retail LGA 1700 lineups target 12th to 14th Gen desktop parts, and Bartlett Lake embedded SKUs belong to industrial PCs, embedded motherboards and module products. Without processor initialization data in firmware, a retail board stops before POST. Desktop builders on LGA 1700 stay with the 14th Gen.

Pick W680 class boards for ECC memory at remote sites and Q670 class boards for centrally managed fleets. The Socket vs chipset: what decides whether a CPU works guide shows why chipset series plus BIOS revision together determine which processors a board accepts.

Memory, PCIe and cooling

DDR5 to 5600 MT/s or DDR4 to 3200 MT/s is supported on two channels to 192 GB, ECC included, with the board fixing the memory generation. DDR4 keeps legacy industrial kits productive, while DDR5 widens headroom for buffering and display tasks. Capacity planning should reserve ECC UDIMMs where W680 class boards expose them.

Twenty processor lanes split into sixteen PCIe 5.0 and four PCIe 4.0, with chipset DMI linking extra board I/O. That layout hosts a fast network interface or accelerator beside NVMe storage in compact edge servers. Intel UHD Graphics 770 with 32 execution units serves control displays and inspection monitors without a discrete card.

Cooling follows the industrial heatsink list for the 45 W class on the 45.0 × 37.5 mm heat spreader. No cooler ships with the tray part. Firmware power limits can cap draw below the default where a sealed cabinet demands it, at some cost in sustained clocks.

Upgrade paths

On the same socket, the path up from the 221TE starts with the 65 W Intel Core 5 221E twin for higher sustained clocks on LGA 1700 industrial boards where cooling allows. The 24-core Intel Core 7 251TE beside it adds cores at the same 45 W class. Each move needs a BIOS that already supports Bartlett Lake.

The step down to the 45 W Intel Core 5 211TE trims 4 E-cores for smaller cabinets. A move to BGA 1264 Atom Amston Lake is a different soldered platform with far fewer lanes for sealed micro nodes. That change replaces board, memory and cooling from scratch.