Intel Xeon E5-2698B v3 socket: LGA 2011-v3

The Intel Xeon E5-2698B v3 uses the LGA 2011-v3 socket on C612 dual socket boards. It is a 16 core Haswell-EP part with 32 threads from 2.0 GHz to 3.4 GHz at 135 W.

Launched
January 2015
Cores and threads
16 and 32
Base power
135 W
Codename
Haswell-EP
Segment
Server
Clocks
2.0 / 3.4 GHz

Intel Xeon E5-2698B v3 specifications

Cores16
Threads32
Core architectureHaswell cores on 22 nm
Clocks2.0 GHz base, up to 3.4 GHz turbo
Cache40 MB Smart Cache
Processor base power (TDP)135 W
Manufacturing process22 nm
Memory supportDDR4 ECC, four channels, up to 768 GB
PCI ExpressPCIe 3.0, 40 lanes
Integrated graphicsNone
ECC memorySupported
PackageFCLGA2011 (LGA 2011-v3)

Motherboard and chipset compatibility

Intel Xeon E5-2698B v3 needs a motherboard with a LGA 2011-v3 socket. The table shows which chipset series accept it.

SeriesChipsetsSupport
C612 seriesC612Works out of the box

Board makers publish a CPU support list for every model. Check it for your exact board before buying. Chipset details for LGA 2011-v3.

LGA 2011-v3 at a glance

TypeLGA, 2,011 contacts
Package size52.5 × 45 mm
IntroducedAugust 2014
MemoryDDR4-2400, four channels, up to 128 GB
Cooler mounting holes80 × 80 mm

Read the full LGA 2011-v3 socket guide

What the Xeon E5-2698B v3 is

The Xeon E5-2698B v3 is a 16 core Haswell-EP OEM part on LGA 2011-v3 for cloud dual socket nodes. It runs 16 cores and 32 threads at 2.0 GHz base with turbo to 3.4 GHz. Forty megabytes of Smart Cache feed dense guests. Power is 135 W on 22 nm from the first quarter of 2015. The B suffix marks a cloud tuned bin with lower base and high turbo.

Sixteen cores maximize threads per socket for consolidation. Low base clocks protect power while turbo covers bursts to 3.4 GHz. Two QPI links tie dual sockets. OEM distribution means support follows vendor nodes rather than retail boards.

No integrated graphics exist. DDR4 with ECC over four channels feeds the node. Buyers meet it in refurbished cloud servers where 16 cores at 135 W fit density plans.

Socket and motherboard compatibility

The 2698B v3 fits LGA 2011-v3 on C612 Grantley boards with OEM firmware. The LGA-2011-3 and Socket R3 names in third party listings refer to this same v3 socket. Check the vendor node list for the B bin microcode.

DDR4 RDIMMs with ECC populate four channels per socket. The Socket vs chipset: what decides whether a CPU works guide covers ideas, vendor docs decide layouts. LGA 2011 without v3 never boots.

Memory, PCIe and cooling

DDR4 ECC over four channels to 768 GB per socket suits cloud hosts. Registered modules allow full counts. Speeds reach 2133 MHz. Even populations protect per core bandwidth.

PCIe 3.0 with 40 lanes per socket serves NVMe and networking. Density favors fabric throughput. NUMA aware scheduling trims tail latency.

Cooling uses 135 W server heatsinks with strong airflow. Sixteen cores run hot under all core loads. Refurbished nodes need paste and fan service to hold turbo.

Upgrade paths

On the same socket the Intel Xeon E5-2678 v3 at 12 cores with higher clocks suits latency work, while the Intel Xeon E5-4667 v3 at 16 cores covers 4S density. All share LGA 2011-v3 where firmware lists them.

A v4 move needs new firmware. The 2698B v3 covers OEM 16 core density where cloud supply decides.

Frequently asked questions

What socket does the Intel Xeon E5-2698B v3 use?

It uses LGA 2011-v3, also listed as LGA-2011-3 or Socket R3 by third parties.

How many cores does the Xeon E5-2698B v3 have?

16 cores and 32 threads at 2.0 GHz base with turbo to 3.4 GHz.

What is the TDP of the Xeon E5-2698B v3?

135 W.

When did the Xeon E5-2698B v3 launch?

Early 2015 through OEM cloud vendors.

Sources and verification

  1. Intel Xeon E5-2698B v3 (x86-guide, SKU specs)
  2. Intel Xeon E5 v3 Datasheet Vol 1 (Intel, Haswell-EP family data)

Facts last checked against these sources on . Page last edited on .