Intel Core Ultra X7 368H socket: BGA 2540

What the Core Ultra X7 368H is

The Intel Core Ultra X7 368H is a 16-core, 16-thread mobile processor that Intel launched in January 2026 as a launch member of Core Ultra Series 3, the family codenamed Panther Lake. Its four Cougar Cove Performance-cores run at 2.0 GHz and reach up to 5.0 GHz, while eight Darkmont Efficient-cores cover parallel work at 1.6 GHz and up to 3.8 GHz and four low-power Efficient-cores handle background tasks at 1.6 GHz and up to 3.6 GHz. All sixteen cores share 18 MB of Intel Smart Cache, and with no Hyper-Threading the thread count matches the core count at sixteen.

Graphics and AI acceleration sit on the same package. Intel Arc B390 graphics with twelve Xe3 cores runs at up to 2.5 GHz with 122 TOPS of Int8 throughput for gaming, video editing and creation work without a discrete GPU. A discrete NPU adds 50 TOPS for background blur, noise suppression and other on-device AI features that run without waking the CPU cores. Intel builds the compute tile on the Intel 18A process, while the graphics tile uses TSMC N3E, and the chip is rated at 25 W of processor base power with up to 80 W of maximum turbo power.

The 368H is the business flagship of the January launch. It carries vPro eligibility for managed fleets, which separates it from its consumer twin the Core Ultra X9 378H even though cores, clocks, cache, graphics, memory and power match exactly. That validation matters to IT departments that buy identical laptops in volume and keep a single system image across a refresh cycle.

Inside the wider family the 368H sits just below the 5.1 GHz Core Ultra X9 388H and just above the 4.8 GHz Core Ultra X7 358H, which shares the same twelve-core GPU and 9600 MT/s memory at a lower price. Intel positions the X models as the top mobile tier for premium thin laptops where integrated graphics carry the display, with pre-orders opening in early January 2026 and systems arriving later that month.

Socket and motherboard compatibility

The Core Ultra X7 368H is soldered to its board in the BGA 2540 ball grid array, so there is no socket to plug into and the chip cannot be replaced or upgraded later. The 2,540-ball joint is made once at the factory on a 50 × 25 mm FCBGA2540 package, and each laptop or compact board design is qualified around this exact SKU for its whole service life.

There is no board or chipset choice in the retail sense. The system vendor selects the memory capacity, sets the power policy between the 15 W minimum assured power and the 80 W turbo ceiling, and validates the thermal design for that envelope. Firmware, drivers and the NPU software stack come from the same vendor, so buyers compare finished systems rather than motherboards.

The BGA 2540 footprint is shared with the other Panther Lake H processors and the Arc G3 handheld parts, from 12-core mainstream SKUs to 16-core flagships. Sharing a package does not create an upgrade path, since moving between SKUs still means a different board build with different firmware and validation. Fleet buyers choose a system built around this chip or the 388H from the start.

Memory, PCIe and cooling

Memory is dual-channel LPDDR5X up to 9600 MT/s, with up to 96 GB depending on the design, and the fitted capacity is fixed when the board is built. The 9600 MT/s ceiling is the fastest memory in the Panther Lake H family and it feeds both the CPU cores and the large Arc B390 GPU, which shares system RAM. Capacity planning belongs at purchase time because most thin designs solder the memory next to the processor.

Expansion comes from twelve PCIe lanes out of the processor across PCI Express 5.0 and 4.0, split as four Gen 5 lanes plus eight Gen 4 lanes, with Thunderbolt 4 for docks and fast external storage. In practice those lanes serve NVMe storage and high speed peripherals, while display output runs through the integrated graphics with eDP 1.5, DisplayPort 2.1 and HDMI 2.1. The exact lane split and port list are set per system design, so the vendor specification governs what each chassis exposes.

Cooling is a system responsibility across the 15 W to 80 W span. Four Performance-cores plus twelve Xe3 cores make sustained all-core and gaming loads the hardest case for a thin chassis, so fan and heatsink choice decides how long the chip holds peak clocks. There is no boxed cooler and no retail heatsink list for a soldered mobile processor, and power policy in firmware decides the balance between fan noise and speed.

Upgrade paths

There is no CPU upgrade path on a soldered package. When sixteen cores stop being enough, the step is a new system, since the 368H already sits near the top of the stack and only the 388H clocks higher on the same socket, and that still means a different board. Memory size changes mean a new board for the same reason, so buyers who keep large projects resident should size up at purchase.

Moving off BGA 2540 means a new platform. Higher power designs with socketed desktop or HX mobile processors serve sustained workstation loads, while standard H processors with smaller graphics and more PCIe lanes serve laptops built around discrete GPUs. The LGA, PGA and BGA: CPU package types explained guide explains how soldered packages differ from socketed ones and why the whole device is the unit of replacement here.