AMD Opteron 6338P socket: Socket G34

The AMD Opteron 6338P uses the Socket G34 socket on SR5600 series server boards. It is a 12 core Warsaw part from 2.3 GHz to 2.8 GHz at 99 W with no integrated graphics.

Launched
January 2014
Cores and threads
12 and 12
Default TDP
99 W
Codename
Warsaw
Segment
Server
Clocks
2.3 / 2.8 GHz

AMD Opteron 6338P specifications

Cores12 (two six-core dies)
Threads12
Core architecturePiledriver cores on 32 nm
Clocks2.3 GHz base, up to 2.8 GHz turbo
Cache12 MB L2 and 16 MB L3
Default TDP99 W
Manufacturing process32 nm
Memory supportDDR3-1600 ECC, four channels
PCI ExpressNone from the CPU. HyperTransport links; PCIe Gen 2 from chipset
Integrated graphicsNone
HyperTransport4 links, 16-bit, 3.2 GHz
PackageFCLGA-1944 (Socket G34)

Motherboard and chipset compatibility

AMD Opteron 6338P needs a motherboard with a Socket G34 socket. The table shows which chipset series accept it.

SeriesChipsetsSupport
SR5600 seriesSR5690, SR5670, SR5650Works out of the box

Board makers publish a CPU support list for every model. Check it for your exact board before buying. Chipset details for Socket G34.

Socket G34 at a glance

TypeLGA, 1,974 contacts
Package sizen/a
IntroducedMarch 2010
MemoryDDR3-1600 ECC, four channels
Cooler mounting holesBoard specific (server heatsink)

Read the full Socket G34 socket guide

What the Opteron 6338P is

The Opteron 6338P is a 12 core Warsaw server part on Socket G34 for efficient private clouds. It runs 12 Piledriver cores and 12 threads on two dies at 2.3 GHz base with turbo to 2.8 GHz and all core turbo near 2.5 GHz. Twelve megabytes of L2 plus 16 MB of L3 cover guests. Power is 99 W on 32 nm from January 2014.

Twelve cores balance density and clocks for virtualization hosts. Turbo covers bursts while all core loads hold near 2.5 GHz. Four HyperTransport links at 3.2 GHz tie up to four sockets. The 99 W envelope with 27 percent better performance per watt than older 6300 parts suits large deployments.

DDR3-1600 ECC over four channels feeds the two dies. ECC guards cloud guests. Buyers pick the 6338P where 12 threaded cores at 99 W must fit 2S and 4S Supermicro and Sugon nodes.

Socket and motherboard compatibility

The 6338P fits Socket G34 on SR5650, SR5670 and SR5690 boards with Warsaw firmware. The dual die FCLGA-1944 package seats in the 1974 contact socket. Up to four sockets scale one node. Check the vendor stepping list before mixing with older Abu Dhabi parts.

Registered ECC DIMMs populate four channels per socket. The socket SR5600 table covers this Warsaw codename. SP3 EPYC boards never accept Opteron silicon.

Memory, PCIe and cooling

DDR3-1600 ECC over four channels per socket with up to 51.2 GB/s suits cloud guests. Registered modules allow large counts. Even populations across sockets protect NUMA fairness.

No PCIe lanes come from the CPU. HyperTransport links carry socket traffic while PCIe Gen 2 slots hang off the chipset. A 10 GbE fabric suits cluster links.

Cooling uses 2S and 4S server heatsinks for 99 W continuous. No boxed cooler ships. Data center airflow decides sustained turbo.

Upgrade paths

On the same socket, the AMD Opteron 6370P at 16 cores and 2.0 GHz to 2.5 GHz above doubles threads per socket for denser clouds. Both share G34 boards where firmware lists them.

A move to EPYC needs new SP3 boards. The 6338P covers efficient 12 core Warsaw clouds where clocks still matter.

Frequently asked questions

What socket does the AMD Opteron 6338P use?

It uses Socket G34 on SR5600 series server boards.

How many cores does the Opteron 6338P have?

12 cores and 12 threads at 2.3 GHz base with turbo to 2.8 GHz.

What is the TDP of the Opteron 6338P?

99 W for efficient 2S and 4S clouds.

When did the Opteron 6338P launch?

January 2014 with Warsaw P parts.

Sources and verification

  1. AMD Opteron 6338P Specs (TechPowerUp)
  2. AMD introduces two new low power Opteron 6300 processors (PC Perspective)

Facts last checked against these sources on . Page last edited on .